Installation Steps of Three-speed Faucet

Installation steps of shower faucet
1. Before installing the shower faucet, make various preparations, including tool preparation, faucet parts inspection preparation, and see if all the accessories are complete. It is necessary to ensure that the hoses and showers of each part of the faucet are complete, so as to avoid problems during the later installation and affect the comfort of use.
2. Generally, shower faucets are divided into two modes: cold water and hot water, and the direction can be considered according to needs. However, from the general design, it is cold water on the right and hot water on the left. When installing, pay attention to determining the direction to ensure the smoothness of the subsequent installation and reduce the occurrence of problems.
3. For the formal installation of the shower faucet, pay attention to first fixing the elbow with a wrench, and find out the joint level connection of the water outlet. Generally, the height of the faucet must be determined at this time. After finding the accurate position, use an electric drill to drill holes, taking into account the depth of the hole diameter, etc., and then fix it.
4. The hose connection is also important in the entire shower faucet installation. After fixing the position of the shower, you can directly connect the hose to the hot and cold water tap switch. When connecting, you must be optimistic about the entire process, ensure good practicability, try to avoid looseness, etc., and enjoy stable use.
5. After the installation of all the shower faucets is completed, the corresponding inspection work should be done to see if the faucet can be connected and used, and whether it has good stability.