Maintenance and Cleaning of Two-speed Faucet

Maintenance and cleaning of Two-speed Faucet
1. The surface of the faucet should always be gently wiped with a soft cloth dipped in detergent. Avoid using metal filaments or scouring pads with harder particles. In addition, don't hit hard objects to damage the surface of the faucet.
2. Use the following cleaning agents to remove rough masks and accumulations: mild liquid glass cleaner, pure liquid glass cleaner, acid-free, non-abrasive soft liquid or completely dissolved powder, non-friction solution polish.
3. Do not use any abrasive cleaners, cloth or paper cloth; do not use any acid-containing cleaners, polishing abrasives or rough cleaners.
4. When the water pressure is not less than 0.02mpa, after a period of use, if the water output is found to decrease, or even the water heater is turned off, you can gently unscrew the screen cover at the water outlet of the faucet. Eliminate impurities, and generally restore to the original state.
Maintenance of bathtub Two-speed Faucet
1. Before installing the faucet, you need to flush out the sediment and impurities in the water pipe, get out the sundries in the installation hole, and check that the accessories in the packing box are not mixed with impurities, while gambling or wearing the ceramic valve core.
2. Apply toothpaste on a soft cloth to clean the surface, and then clean the surface with water. Do not use alkaline cleaners or wipe with scouring pads or steel balls to avoid damage to the electroplated surface.
3. During use, the single-handle faucet should be opened and closed slowly; the double-handle faucet should not be closed too tightly, otherwise the stopcock will fall off, causing the problem of inability to close or stop the water.